Hot tub made of fiberglass 2.0m in diameter
28 000 SEK
This wood-fired hot tub with an insert is suitable for larger groups and companies. The tub accommodates 8-10 people and holds approximately 2,000 liters of water. It takes 2-2.5 hours to heat from tap water at 3 degrees to 38 degrees. The insert is cast in one piece with the tub's sides and benches. This hot tub has benches all around, and the seating height is comfortable with legs comfortably extended.
Product info:
- The outer diameter of the hot tub is 2.03 meters.
- Outer diameter with rim: 2.22 m
- Inner diameter: 1.98 m
- Height with rim and bottom logs: 0.95 m
- Length of bottom log in the middle: 1.91 m
- Length of the side logs: 1.29 m
- Distance between the logs: 0.66 m
- Depth with rim: 0.82 m
- Seat depth: 0.67 m
- Bench height: 0.15 m
- Weight: 210 kg
- Water consumption: approx. 2 000 litres
Special high-quality fiberglass insert
Our fiberglass hot tub is made of vacuum-injected fiberglass, which provides better results than traditional handmade fiberglass.
- No external environmental impact during manufacturing
- The fiberglass cannot be separated
- Does not need to be reinforced with wooden boards
- No sharp edges or corners
- Stronger hot tub
- Lighter hot tub
- Higher finish
- Longer lifespan
We are the only company in Sweden that sells hot tubs with vacuum-injected inserts. Only a few factories are able to use this method. It is complicated and expensive molds are required, but the result is an extremely good product.
Swedish manufacturing - 25 years of experience
Don't be fooled by a beautiful outer facade. There are hot tubs where the fiberglass loses color and gets blisters, the tubs lack a real bottom, the walls are just decorative and almost completely lack function, and the stated heating times are not accurate. With Sotarns Badtunnor, you get a hot tub that has been developed through 22 years of experience in hot tub manufacturing and over 15,000 hot tubs produced.
We take all components from leading Swedish manufacturers and all assembly takes place in Sweden.
Real wooden hot tub with bottom and walls in 36 mm Northern late-grown spruce.
With a real wooden hot tub around the insert, there is an air gap between the wood and the fiberglass which gives a "thermos effect", which means that the tub heats up faster and stays warm longer.
We think the most important thing is that the hot tub has a real bottom. It has many advantages to:
- This avoids ground cold and moisture from below
- Rats and vermin do not build nests in the bottom of the barrel
- The hot tub is ready to display and use
Fast heating, high combustion temperature and no smoke
It is very important for a hot tub to heat up quickly, otherwise it risks standing idle. Our stove is made based on the knowledge that exists around modern wood burning. Our efficient stove is very popular with our customers and has a large part in why we are so big in the market. The same efficient stove is used in both our largest and smallest hot tub.
